Main Types of Solar Panel Brackets, Classified by Installation Location
Roof-Mounted Brackets
This type is commonly used in residential and commercial buildings to securely mount solar panels on roofs. The specific bracket type depends on the roof material:
Pitched Roof Mounts: Typically use rails, which are fixed to roof rafters via specialized roof connectors. Solar panels are then secured to the rails with module clamps.
Railed Systems: The most traditional installation method.
Rail-Less Systems: Attach panels directly to hardware fixed on the roof.
Flat Roof Mounts: Often adopt ballasted mounting systems, which secure panels with weights (such as concrete blocks) without penetrating the roof. These brackets usually tilt the panels to an optimal angle.
Ground-Mounted Brackets
This type is used when there is sufficient open space or the roof is unsuitable for installation. It requires building a dedicated support structure on the ground:
Fixed-Tilt Ground Mounts: Panels are set at a permanent optimal angle and not adjusted afterward.
Pole-Mounted Systems: Panels are mounted on a single pole (either on top of the pole or the side of the pole). They are often used for small arrays or in remote areas, and some can be adjusted seasonally.
Tracking Brackets
Equipped with motorized drives, these brackets adjust the angle of solar panels throughout the day to track the sun's path, maximizing energy generation. They are divided into two types: single-axis tracking (tilting on one plane) and dual-axis tracking (tilting on two planes).
Specialty/Elevated Structure Brackets
Solar Carport/Canopy Brackets: These are elevated mounting structures, similar in design to ground mounts. They provide shade for parking areas or other spaces below.
Floating Brackets: Systems specifically designed for installation on the surface of water bodies such as ponds and reservoirs.
